Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 165)

GPS Reference Manual
70
Rec Interval : the recording interval set on the Post Process card of the
Job, Settings screen (page R- 11).
Mem. Threshold : displays the memory threshold set on the Post
Process card of the Job, Settings screen.
SV Threshold : the satellite threshold set on the Post Process card of
the Job, Settings screen.
HDOP Threshold : displays the HDOP threshold set on the Post
Process card of the Job, Settings screen.
Note: The threshold fields display Off if the Survey Pro Threshold
Manager is turned off.
Last Antenna for this Receiver : displays antenna information defined
from the Post Processing Antenna screen, opened from
6HWXS +5. The
title of this field changes depending on if the antenna has already
been setup.
Measured : is where you enter the height of the antenna, measured to
the location specified on the Post Processing Antenna screen.
6HWXS +5 : opens the Post Processing Antenna screen (Page R-27)
where the details of the base antenna are defined.
Post Processing Antenna Screen
6XUYH\ 6WDUW 6WDWLF 5[ 6HWXS +5
The Post Processing Antenna screen is used to define the parameters
of the antenna. The screen is identical to the Base Receiver Antenna
screen, which is described on Page R-27.
Start Stop/Go Rx
6XUYH\ 6WDUW 6WRS*R 5[
The Stop/Go Rx Recording screen is used to start or stop recording in
a stop and go receiver’s internal memory and change the recording
interval or antenna height. It is identical to the Static Rx Recording