Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 108)

Job Menu
13
&KDQJH« : opens the Receiver Communications screen, where many
of the displayed communications settings can be changed.
Receiver Communication Screen
-RE 6HWWLQJV 5HFHLYHU 5HFHLYHU 6HWWLQJV 5HFHLYHU &KDQJH
The Receiver Communication card is used to change the settings for
communication between the data collector and the receiver.
Baud Rate : is where you select the
communication baud rate.
Note: When you tap
2., the selected baud
rate will only get set in Survey Pro. To set the
selected baud rate on the receiver, tap
5HFHLYHU 6HW.
Parity : is where you select the communication
parity (if it is user selectable).
Note: For receivers where parity is not user definable, this field
simply displays the default parity.
Serial Port (GPS Receiver) : is where you select the serial port on the
receiver.
Serial Port (Data Collector) : is where you to select the serial port on
the data collector.
'HIDXOWV : sets all the fields to the default values.
5HFHLYHU 6HW : sets the baud rate on the chosen receiver port to the
selected value.
Note: This function requires that communication is already open
between the data collector and receiver. If communication is not
open, use
$XWR 'HWHFW first to get the current receiver communication
settings.