Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 24)

GPS User’s Manual
20
RTK Settings
If you are using Survey Pro for RTK, or RTK and post processing
simultaneous data collection, the following cards of the Job, Settings
screen contain settings specific to RTK:
• Measure Mode: is where you select the receiver dynamic for point
occupations and the type of GPS raw data to store for each point.
You can also specify measurement acceptance criteria. For more
information see the Reference Manual.
• Projection: is where you set your horizontal and vertical
projection type and specify the path to geodetic data files. For
more information see the Reference Manual.
Post Processing Settings
If you are using Survey Pro for post processing data collection, the
following settings apply.
• Post Process: is where you turn on post processing data collection
by specifying a recording interval for the receiver’s internal
memory. You can also specify how to deal with autonomous
positions and select a special layer to store autonomous points on.
For more information see the Reference Manual.