Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 154)

Survey Menu – RTK
59
Receiver Recording
6XUYH\ 5HFHLYHU 5HFRUGLQJ
The Receiver Recording screen is used to start or stop the receiver
recording. When in RTK mode, it allows you to stop the recording of
the base or rover RTK receiver.
6WDUW 5HFRUGLQJ : Opens a file on the receiver’s
internal memory and begins recording GPS
raw data for post processing. Next, the Static
Receiver Session screen is opened (Page R-71)
where you need to enter the station
information and start mark the beginning of
the occupation.
6WRS 5HFRUGLQJ : Stops recording GPS raw
data for post processing on the receiver’s
internal memory and closes the open file.
&KDQJH 6HWWLQJV« : opens up the Post Process
card of the Job, Settings screen.
Rec Interval : the recording interval set on the Post Process card of the
Job, Settings screen (page R- 11).
Mem. Threshold : displays the memory threshold set on the Post
Process card of the Job, Settings screen.
SV Threshold : the satellite threshold set on the Post Process card of
the Job, Settings screen.
HDOP Threshold : displays the HDOP threshold set on the Post
Process card of the Job, Settings screen.
Note: The threshold fields display Off if the Survey Pro Threshold
Manager is turned off.
Last Antenna for this Receiver : displays antenna information defined
from the Post Processing Antenna screen, opened from
6HWXS +5. The