Physical description/drawing of controller, Use of equipment, Installation – Hired-Hand System 2001 Power Curtain Controller User Manual
Page 5: 1 tools required, 2 instructions

4801-1200 System 2001 Power Curtain Controller
2
not be liable for any consequential damages resulting from the use of our products or caused by any defect,
failure or malfunction of our products. (Some areas do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.)
This warranty gives you specific legal rights and you may also have other rights that vary from area to area.
Warrantor:
Hired-Hand, Inc.
1733 Co. Rd. 68
PO Box 99
Bremen, AL 35033
4. Physical Description/Drawing of Controller
TM
HIRED-HAND
CONTROLLER
System 2000
6
7
8
9
10
11
12
POWER CURTAIN
POWER CURTAIN
AUTOMATIC MODE
PROGRAM FEATURES
MANUAL MODE
Power Unit
Power Unit
Outside Sensor Control
(OSC)
Model #AA-III
Model #AA-III
HIRED-HAND, INC.
Bremen, AL 35033
Normal curtain operation occurs between
Normal curtain operation occurs between
High and Low limits (when OS. is
High and Low limits (when OS. is ON
ON))
Read Warning Label
Read Warning Label
Outside Sensor Control (OSC)
Inside
Temp
Low
Limit
High
Limit
81.5
Automatic mode...
Select
Feature
Change
Setting
5. Use of Equipment
The System 2001™ Power Curtain™ Controller is an eight stage temperature controller intended for use in
agricultural enclosures.
6. Installation
6.1 Tools Required
Kit Bag (Included)
Screwdriver
Crimping Pliers
Volt meter
6.2 Instructions
1. Unpack system, and check that all components are present.
1
System 2001™ Power Curtain Controller
1
Installation Kit
1
Fuse Kit
4
Sensors (depending on model)
1
PVR-H Relay Box