beautypg.com

Hired-Hand System 2001 Power Curtain Controller User Manual

Page 42

background image

4801-1200 System 2001 Power Curtain Controller

39

Heat Mode: The method of heating the building; only operates when the curtains

are in the closed position and the building temperature is below target
temp.


Inches of Initial Drop: The amount, in inches, the curtains will drop to provide ease of

movement and adequate ventilation. The curtains will never stop
inside this range.


Level: A selected program can be saved, then restored and used at a future

date.


Light Strip Control: The providing of natural light to Breeder Pullets using a narrow strip

of clear curtain.


Manual Mode: Raising or lowering curtains manually, The System will not

automatically move the curtains if they are in Manual Mode.


Menu: A list of options pertaining to a particular Program Feature.

Negative Ventilation: The action of air being drawn out of the building by the use of fans.

Inlet openings are restricted so as to cause a defined Negative Static
Pressure Differential between the inside and outside the building.


Nite Vent Program: The use of natural ventilation by the lowering of the curtains at night

while growing blackout Breeder Pullets.


Offset: The distance in degrees below or above target temperature when the

heat or cool stage will disengage.


Outside Sensor: An instrument used to measure the temperature outside the building.

Outside Sensor Control
High Differential:
The distance in degrees below the Outside Sensor Control High limit

that, when reached, causes The System to exit Tunnel Mode and
return to the previous Mode.


Positive Ventilation: Pushing air into the center of the building and circulating the air with

stir fans.


Power Unit: A device used to control curtain movement. The System can control up

to two Power Units Independently.


Program Stages: An eight-step process that determines the operation of The System so

that it will produce the desired outcome.


Program: A selected plan of operations to be carried out by The System's

computer.


Ramp Function: The function that automatically reduces temperature on a day to day

basis.