Hired-Hand Mega-Cool rev 4-08 - Manual (Page 8)

Part No. 4801-5093 Rev 4-08 Unitized System Page 8
Installation Cross-Section
(Horticulture Application)
1. Drawing shown to the left is an overview of a
completed Unitized system without end caps.
2.
The figure details the overall dimension for each pad
system and minimum clearance from roof.
6" Pad "A" "B"
4ft High Pad 61 1/8 in. 155.26 cm 66 in. 167.6 cm
5ft High Pad 73 1/8 in. 185.74 cm 78 in. 198.1 cm
6ft High Pad 85 1/8 in. 216.22 cm 90 in. 228.6 cm
4" Pad "A" "B"
4ft High Pad 62 1/8 in. 157.80 cm 66 in. 167.6 cm
5ft High Pad 74 1/8 in. 188.28 cm 78 in. 198.1 cm
6ft High Pad 86 1/8 in. 218.76 cm 90 in. 228.6 cm
3/8”
(.95 cm)
Side View
4.0 in.
10.2 cm
Curtain
Cover
(Ordered Separately)
8” Pipe
Support Bracket
Horizontal Support
Required for 8’, 10’ and
12’ Spaced Columns
(6”or 8” C-Section and
Mounting Brkts.
Ordered Separately)
18” Min.
(45.7 cm)
Drip Rail
Pad
Height
"B"
See
Table
Pad
(End-Cap
not shown.)
"A"
See
Table
Pad Cover
Splash Guard
Splash Guard
Support Brkt.
Overhang
Bracket
Back-plate
Bottom Flashing
8.0 in. (20.3 cm)
Minimum Clearance
to overhead
gutters, etc.
Back-plate
Support Brkt.
Horizontal Support
Required for 8’, 10’ and
12’ Spaced Columns
(8” C-Section and
Mounting Brkts.
Ordered Separately)
Back Flashing
(Ordered Separately)