Brocade Virtual ADX Administration Guide (Supporting ADX v03.1.00) - Manual (Page 52)

40 Brocade Virtual ADX Administration Guide
53-1003249-01
Displaying system information
1
BP 2: last sec: 0.20%, 5 sec: 0.10%, 60 sec: 0.09%, 300 sec: 0.09%
Per core utilization:
Core 1: last sec: 1.00%, 5 sec: 0.60%, 60 sec: 0.32%, 300 sec: 0.29%
Core 2: last sec: 0.00%, 5 sec: 0.40%, 60 sec: 0.48%, 300 sec: 0.52%
Core 3: last sec: 0.00%, 5 sec: 0.00%, 60 sec: 0.00%, 300 sec: 0.00%
Core 4: last sec: 0.00%, 5 sec: 0.00%, 60 sec: 0.03%, 300 sec: 0.01%
Syntax: show cpu-utilization
The fields for this command are as follows:
• The Per process utilization fields display the CPU utilization for the BP and MP.
• The Per core utilization fields display the CPU time spent in task manager, packet drivers,
kernel housekeeping and interrupt processing.
BP utilization threshold
The bp-utilization-threshold command allows you to specify a threshold for barrel processor (BP)
CPU utilization. Define this command under the global configuration mode.
When the threshold is exceeded, the event is logged and a trap is sent. The log and trap are
rate-limited to one per two minutes.
The command takes a percentage string as parameter.
Virtual ADX(config)#bp-utilization-threshold 80.5%
Syntax: bp-utilization-threshold percentage
Displaying and saving tech support information
Commands are provided on the Brocade Virtual ADX that help you display and save information
that can help Brocade Technical support troubleshoot your system. These commands are
described in the following sections.
Displaying tech support information
To display technical support information use the following command.
VirtualADX#show short-tech-support
Tech Support Info
Time: 17:13:59, GMT+00, Mon Jun 17 2013
!Building configuration...
!Current configuration : 342 bytes
!
ver 02.0.00T001
!
context default
!