Configuring system parameter settings – Brocade Virtual ADX Administration Guide (Supporting ADX v03.1.00) User Manual
Page 37

Brocade Virtual ADX Administration Guide
25
53-1003249-01
Configuring system parameter settings
1
For additional information about these commands, refer to the Brocade Virtual ADX Switch and
Router Guide.
NOTE
The clear statistics and clear statistics management 1 commands do not reset statistics related to
management interface. To reset the Brocade Virtual ADX management interface statistics, use the
reboot command from the Linux console.
Displaying management port route information
You can display management port route information as shown in the following.
Syntax: show ip route
Configuring system parameter settings
The Brocade Virtual ADX has system parameters as listed in
. The minimum, maximum,
and default settings for these parameters are determined by the license that is active on your
system. For actual values associated with your license, refer to the Brocade Virtual ADX Licensing
Guide.
Virtual ADX#show ip route
Total number of IP routes: 2
Start index: 1 D:Connected R:RIP S:Static O:OSPF *:Candidate default
Destination NetMask Gateway Port Cost Type
----------------------------------------------------------------------
1 10.10.10.0 255.255.255.0 0.0.0.0 mgmt1 1 S(N)
2 10.0.0.0 255.255.255.0 10.10.10.254 mgmt1 1 S(N)
TABLE 1
System parameters
System parameter
Description
healthchk
Number of healthcheck entries supported
ip-arp
ARP entries supported
ip-cache
IP cache entries supported
ip-filter-port
Number of IP filter ports supported
ip-filter-sys
Number of IP filter entries supported
ip-route
Number of IP routes supported
ip-static-arp
Static ARP entries supported
ip-static-route
Number of IP static routes supported
ip-subnet-port
Number of IP subnets per port supported
ip6-cache
IPv6 cache entries supported
ip6-neigh
Number of IPv6 Neighbors supported
ip6-route
Number of IPv6 routes supported
ip6-static-route
Number of IPv6 static routes supported
l3-vlan
Number of L3 VLANS supported
l4-multi-binding
Number of L4 multi-binding entries supported
l4-real-server
Number of L4 real server entries supported