Brocade Virtual ADX Global Server Load Balancing Guide (Supporting ADX v03.1.00) - Manual (Page 24)

14 Brocade Virtual ADX Global Server Load Balancing Guide
53-1003245-01
Minimum required configuration
1
port dns
port http
bind dns dns-rs dns
bind http dns-rs http
!
gslb dns zone
host-info www http
Use server real dns-rs-name dns-ip-addr for a local DNS server. Use server remote-name
dns-rs-name dns-ip-addr for a remote DNS server. The host-info defines an enabled application in
the DNS zone. For example, you can also specify host-info ftp ftp.
Issue show gslb site on the controller to display site communication information. The state displays
“CONNECTION ESTABLISHED” when communication is successful. A protocol version of 1
corresponds to “ATTEMPTING CONNECTION”. Established connections use protocol versions 4 or
higher.
Virtual ADX(config)#show gslb site
SITE: brocade
Enhanced RTT smoothing: OFF
SI: 10.1.1.1:
state: ATTEMPTING CONNECTION
Protocol Version: 1
Active RTT gathering: NO
Secure Authenticate/Encrypt: NO
...