Brocade Virtual ADX Global Server Load Balancing Guide (Supporting ADX v03.1.00) - Manual (Page 179)

Brocade Virtual ADX Global Server Load Balancing Guide 169
53-1003245-01
Displaying GSLB for IPv6 configurations
2
Displaying DNS zone and hosts
Use the show gslb dns command to view information about the DNS zones and host names on
GSLB controllers. The command can be used with or without the zone-name variable, which
specifies a single zone. If this variable is omitted, all zones are displayed.
NOTE
If you also want to display information about the site and Brocade Virtual ADX on which a VIP is
configured, use the show gslb dns detail command instead. For more information, refer to
“Displaying detailed DNS information” on page 172.
To display GSLB information about a specific DNS zone, you must specify the zone such as in the
example:
Virtual ADX(config)#show gslb dns zone brocade.com
ZONE: brocade.com
HOST: www:
(Global GSLB policy)
GSLB affinity group: global
Flashback DNS resp.
delay selection
(x100us) counters
TCP APP Count (%)
* 10.18.2.155: cfg v-ip ACTIVE N-AM 0 0 1 (33%)
* 10.18.2.166: cfg v-ip ACTIVE N-AM 0 0 1 (33%)
* 2001:db8::1: cfg v-ip ACTIVE N-AM 0 0 1 (33%)
* 2001:db8::5: cfg real-ip DOWN N-AM -- -- 0 (0%)
The information displayed is the same as that when you do not specify a zone name, except the
zone field is unneeded and thus does not appear.
Syntax: show gslb dns zone [zone-name]
The zone-name parameter specifies the name of the zone to be displayed. Output differs
depending on the ADX device used and the software release installed on the ADX device.
TABLE 18 GSLB zone and host application information
Field Description
ZONE The zone name. The name that appears here is the name you specified
when you configured the zone information.
NOTE: This field appears only if you do not specify the zone name when
you display the information. If you specify the zone name,
information for only that zone is displayed.
HOST The host name. The name that appears here is the name you specified
when you configured the host information.