Brocade Virtual ADX Global Server Load Balancing Guide (Supporting ADX v03.1.00) - Manual (Page 116)

106 Brocade Virtual ADX Global Server Load Balancing Guide
53-1003245-01
Displaying GSLB information
1
The following example shows information displayed when the connection-load metric is enabled.
Syntax: show gslb site [name]
The name parameter specifies a site name.
To display information about the GSLB site called “sunnyvale” and the ADX devices providing SLB
within those sites, enter the following command.
The show gslb site display shows the following information.
TABLE 7 Global SLB site information
Field Description
ADX device name and IP address For each ADX device, the first item of information listed is the name and
management IP address. This is the information you specified when you
added the ADX device to the site.
SITE Indicates the site name of the ADX device.
NOTE: This field appears only when you enter the show gslb site
command without specifying a site name.
SI Indicates the site ADX device name and management IP address.
Virtual ADX(config-gslb-policy)#show gslb site
SITE: two
SI: 10.1.1.2:
state: CONNECTION ESTABLISHED
Current num. Session CPU load Preference Location Connection
sessions util(%) (%) (0-255) Load-Avg
6 0 19 128 N-AM 30
Virtual IPs:
10.1.1.12(A)
Connection Load (Seconds:AvgLoad):
5:36 10:34 15:32 20:31 25:30 30:28
Virtual ADX(config)#show gslb site sunnyvale
SI: slb-1 10.157.22.209:
state: CONNECTION ESTABLISHED
Current num. Session CPU load Preference Location
sessions util(%) (%)
500000 50 35 128 N-AM
Virtual IPs:
10.157.22.227(A)
SI: slb-2 10.157.22.210:
state: CONNECTION ESTABLISHED
Current num. Session CPU load Preference Location
sessions util(%) (%)
1 0 16 128 N-AM
Virtual IPs:
10.157.22.227(S)