Brocade Virtual ADX Global Server Load Balancing Guide (Supporting ADX v03.1.00) User Manual
Page 186
176
Brocade Virtual ADX Global Server Load Balancing Guide
53-1003245-01
Displaying GSLB for IPv6 configurations
2
Current num. sessions
The number of sessions in the ADX device’s session table. A session is a
one-way connection to or from a real server.
This information is reported by the site ADX device.
NOTE: The number of sessions in the table does not necessarily match
the number of active sessions on the real servers. This can occur
if the session table contains sessions that are no longer active
but have not yet timed out.
Session util (%)
The percentage of available sessions that are in use. This is the
percentage of the total number of sessions the ADX device can maintain
that are in use. For example, if the ADX device can maintain 1 million
sessions (the default session capacity) and the session table contains
500,000 session entries, the session utilization is 50%.
This information is reported by the site ADX device.
CPU load (%)
The percentage of the ADX device’s CPU that is actively engaged in SLB
and other activities.
This information is reported by the site ADX device.
Preference
The numeric preference value for this site ADX device. The preference
can be used by the GSLB policy to select a site. Refer to
on page 156. This information is configured on the
GSLB Brocade Virtual ADX.
Location
The geographic location of the Brocade Virtual ADX. The location is
based on the Brocade Virtual ADX’s management IP address and can be
one of the following:
•
ASIA
•
EUROPE
•
N-AM : North America
•
S-AM : South America
NOTE: If you explicitly identified the geographic location, the value you
specified appears instead of a value based on the IP address.
Refer to
TABLE 20
Global SLB site information (Continued)
Field
Description