Yokogawa EJX440A - Manual (Page 64)

<5. Parameter Summary>
5-3
IM 01C25T01-01E
Function Label Item Contents Default value Handling
Fast key
sequences
Display setup Bar indicator Bar indicator Off or On On W 1, 4, 4, 5
Disp Out 1 LCD output 1 Pres, Pres %, Engr Pres, SP,
or SP %
Pres % W 1, 4, 4, 1, 1
Disp Out 2 LCD output 2 Pres, Pres %, Engr Pres, SP,
SP %, or Not used
Not used W 1, 4, 4, 1, 2
Disp Out 3 LCD output 3 Pres, Pres %, Engr Pres, SP,
SP %, or Not used
Not used W 1, 4, 4, 1, 3
Disp Out 4 LCD output 4 Pres, Pres %, Engr Pres, SP,
SP %, or Not used
Not used W 1, 4, 4, 1, 4
Disp Pres % fnctn % display mode Linear or Sq root As specified or
Linear
W 1, 4, 4, 2, 1
Disp Pres % Reso % display resolution Normal or High resolution Normal W 1, 4, 4, 2, 2
Engr exp Exponents ---, Ч10, Ч100, or ×1000 As specified
or ---
W 1, 4, 4, 4, 3
Engr LRV User set lower range value Unit specified in Set Engr Unit As specified W 1, 4, 4, 4, 1
Engr point Decimal place for user set 0 to 4 2 W 1, 4, 4, 4, 5
Engr URV User set upper range value Unit specified in Set Engr Unit As specified W 1, 4, 4, 4, 2
Modify Engr Unit User set engineering unit As specified M 1, 4, 4, 4, 7
Pres disp point Decimal place for pressure 0 to 4 2 W 1, 4, 4, 2, 3
Set Engr Unit Engineering unit select See section 3.5.3d M 1, 4, 4, 4, 6
SP disp point Decimal place for static pressure 0 to 4 2 WD 1, 4, 4, 3, 1
Error log Error log Clear Clear error records M 1, 2, 5, 2
Error log view Error records Log1 (latest) to log4 M 1, 2, 5, 1
Flg temp Coef Flg temp Coef 0 W, G 1, 2, 4, 4, 2, 1
Flg temp Lim Flg temp Hi Alarm
Val
Upper limit of Flange temperature W, G 1, 2, 4, 4, 2, 2, 1
Flg temp Hi Alarm
Val
Lower limit of Flange temperature W, G 1, 2, 4, 4, 2, 2, 2
Fluct
Variables
fDP Average value of the sum of squares
of differential pressure/pressure
fluctuations
R, G 1, 2, 4, 3, 1, 5, 2
fDP Status Status of fDP R, G 1, 2, 4, 3, 1, 5, 1
fSPl Average value of the sum of squares
of low-pressure-sidestatic pressure
fluctuations
R, G 1, 2, 4, 3, 1, 5, 4
fSPl Status Status of fSPl R, G 1, 2, 4, 3, 1, 5, 3
fSPh Average value of the sum of squares
of high-pressure-side static pressure
fluctuations
R, G 1, 2, 4, 3, 1, 5, 6
fSPh Status Status of fSPh R, G 1, 2, 4, 3, 1, 5, 5
Flg temp Flg temp Calculated flange temperature value R, G 1, 2, 4, 4, 1, 3
Loop test Loop test Test output setting Within AO lower and upper
limits
M 1, 2, 2
Low cut Low cut Low cut 0.00 to 20.00% 10.00% W 1, 3, 7
Low cut mode Low cut mode Linear or Zero Linear W 1, 3, 8
Message Message Message 32 alphanumerics As specified W 1, 3, 4, 3
Number of
requested
preambles
Num req preams Number of requested preambles R 1, 4, 3, 3, 2
Piping
orientation
H/L Swap Impulse piping accessing direction Normal or Reverse Normal WD 1, 3, 9
Poll address Poll addr Poll address for multidrop use 0 to 15 0 W 1, 4, 3, 3, 1
*1: Handling: R=Read only, W=Read & Write, M=Method, A=Applicable for option code AL, G=Applicable for option code DG6,
D=Applicable for differential pressure transmitters. Do not change these parameters for pressure transmitters.
*2: The default value shows MWP (Maximum working pressure) of the capsule.
Since the working pressure limit varies according to the Model, refer to the General Specifications section in each user’s manual.