Watlow MINICHEF 2000 - Manual (Page 8)

G e n e r a l D e s c r i p t i o n
H a r d w a r e & S o f t w a r e S e t u p G u i d e Wa t l o w M I N I C H E F 2 0 0 0 ■ 7
Mating Connectors (purchased as an accessory — not included):
See Accessories ordering information about the following mating connectors:
Sensor Input Mating Connector: RIA Electronic Inc. RIACON #31007106, 6-position,
quick-connect terminal, screw connection for 28-14 AWG wires, tighten to 7 in/lb.
Power Supply and Input/Output Mating Connector Kit: Kit includes: one AMP #1-
640523-0 quick-connect terminal and fifteen AMP #641300-1 crimp pins.
Figure 7a — Mating connectors.
Note: Position mating connector with beveled edges at the top. They are not visible from the front.
Label Information:
Main Label
Sensor input label
If RTD sensors are specified: If thermocouples are specified:
Figure 7b — Labels.
INPUT 1 INPUT 2
TC+ TC— TC+ TC—
N
O
T U
S
E
D N
O
T U
S
E
D
1 2 3 4 5 6
INPUT 1 INPUT 2
S1 S2 S3 S1 S2 S3
1 2 3 4 5 6
Part number
Date Code
Serial number
Pin designations
xxxxx
xxxxx
xxx 1 -xxxx
Agency marks
DATECODE:XXXXX, S/N:XXXXX
HA
2=OC+
3=OC3-
5=OC+
6=OC4-
8=EI1+
9=ALARM
11=EI2+
12=EI1-
13=L2 24V
14=L1 24V
15=EI2-
OPER. RANGE 0-80 DEG C
NSF
C
Power Supply and Input/Output Mating Connector Sensor Input Mating Connector