Step 6 set the real-time clock, P1@£0, A1!£0 – Watlow MINICHEF 2000 User Manual
Page 31: I n i, H e f
3 0
■
Wa t l o w M
I N I
C
H E F
2 0 0 0
H a r d w a r e & S o f t w a r e S e t u p G u i d e
Step 6 Set the Real-time Clock
These instructions are optional and apply only to controllers that are purchased with
the Real-time clock (time of day) option. (Part number example: F2 _ _ - _ _ _ _ - 1 _ _ _)
To set the time of day
1.
Press the Edit key and Home key simultaneously for approximately 3 seconds. You
are now in the Real-time Clock Program Mode.
2.
To change the time press the Up-arrow or Down-arrow key. Note that [A````] indi-
cates a.m. and [P````] indicates p.m..
3.
With the desired time on the display, press the Enter key. The new value will be
saved and the unit will return to the Operation Mode.
Depending on how the controller was programmed in the Configuration Mode, one of
the following will appear on the display:
Time of day
(if [SEtUP] / [CLoc`] is set to [``YES]
in the Configuration Mode).
or
[`idLE]
(if [SEtUP] / [CLoc`] is set to [```no]
in the Configuration Mode).
B
G
H
M
INI
C
HEF
2000
[P1@£0]
Edit
Accept
Back-Up
Exit
D
E
C
F
A
B
G
H
M
INI
C
HEF
2000
[P1@£0]
Edit
Accept
Back-Up
Exit
D
E
C
F
A
A
B
D
E
C
F
Edit
Accept
Back-Up
Exit
G
H
M
INI
C
HEF
2000
[A1!£0]
A
B
D
E
C
F
Edit
Accept
Back-Up
Exit
G
H
M
INI
C
HEF
2000
[A1!£0]
A
B
D
E
C
F
Edit
Accept
Back-Up
Exit
G
H
M
INI
C
HEF
2000
[00000]
S t e p 6 S e t t h e R e a l - t i m e C l o c k