Watlow MINICHEF 2000 - Manual (Page 10)

S t e p 1 I n s t a l l t h e C o n t r o l l e r
Panel Knock-out Pattern for a Mounting Collar in a Horizontal Position
Figure 9a — Pattern for horizontal panel 16- or 18-gauge thick.
Figure 9b — Pattern for horizontal panel 20- or 22-gauge thick.
.800 in. ref
#6-32 stud (4)
minimum recommended
length 0.50 in.
2.462 in.
2.125 in.
1.662 in.
1.530 in.
1.250 in.
0.875 in.
0.375 in.
0.125 in.
0.000 in.
ø0.53 in. (6)
ø0.135 in. (8)
C/L
1.875 in. 1.000 in. 0.500 in. 0.000 in. 0.500 in. 1.000 in. 1.875 in. 1.337 in. 1.338 in.
.875 in. ref
#6-32 stud (4)
minimum recommended
length 0.50 in.
2.535 in.
2.125 in.
1.660 in.
1.530 in.
1.250 in.
0.875 in.
0.375 in.
0.125 in.
0.000 in.
0.250 in.
ø0.53 in. (6)
ø0.135 in. (10)
C/L
1.875 in. 1.000 in. 0.500 in. 0.000 in. 0.500 in. 1.000 in. 1.875 in. 1.405 in. 1.405 in.
1.375 in. 1.375 in.
H a r d w a r e & S o f t w a r e S e t u p G u i d e Wa t l o w M I N I C H E F 2 0 0 0 ■ 9