Watlow CLS200, MLS300 and CAS200 - Manual (Page 67)

Chapter 3: Controller Parameter Descriptions
Communications Specification 61
• Default: 0 (no low deviation alarm output).
Channel Profile and Status (46)
In this byte, bits 0 to 4 hold the ramp-soak profile number for the loop.
Bits 5 to 7 hold the profile’s status (Ready, Running, Hold, Trigger Wait,
or Out of Tolerance).
• Range: See tables below.
• Default: 0.
Bits 0 to 4 hold the profile number and reference letter:
Bits 5, 6, and 7 hold the profile status:
Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Profile
Number
Ref.
Letter
0 0 0 0 0 0 A
0 0 0 0 1 1 B
0 0 0 1 0 2 C
0 0 0 1 1 3 D
0 0 1 0 0 4 E
0 0 1 0 1 5 F
0 0 1 1 0 6 G
0 0 1 1 1 7 H
0 1 0 0 0 8 I
0 1 0 0 1 9 J
0 1 0 1 0 10 K
0 1 0 1 1 11 L
0 1 1 0 0 12 M
0 1 1 0 1 13 N
0 1 1 1 0 14 O
0 1 1 1 1 15 P
1 0 0 0 0 16 Q
Bit 7 Bit 6 Bit 5 Status
0 0 0 Profile in Ready state “S”
0 0 1 Profile is running “R”
0 1 0 Profile is holding “H”
0 1 1 Profile in trigger wait state “W”
1 0 0 Profile out of tolerance “O”
1 1 1 No profile assigned