Watlow CLS200, MLS300 and CAS200 - Manual (Page 18)

12 Communications Specification
Chapter 1: ANAFAZE/AB Protocol
Then the controller sends its reply:
Then the host software sends a DLE-ACK:
x10 02 00 08 41 00 00 00 (DATA) 10 03 C3
DLE
STX
Destination Device Address
Source Device Address (controller address + 7)
Command
Status (00 = nothing to report)
Transaction number
Data (see below)
DLE
ETX
BCC value
xE2 01 09 02 E4 01 09 02 F1 01 DF 01 28 3C E4 01
Data, transmitted LSB first. Assuming precision for loops is –1:
Loop 1 PV = x01E2 = 482, displayed as 48
Loop 2 PV = x0209 = 521, displayed as 52, etc.
DATA:
x10 06
ACK
DLE