Watlow Addendum to EZwarePlus - Manual (Page 30)

To download via Ethernet:
1) Determine the OIT’s IP address:
• If you don’t already know the OIT’s IP address, follow the instructions in Determining or
Setting the OIT’s IP Address on page 4, note the IP address for use below.
2) In EZwarePlus from
the Tools menu,
choose Download.
3) HMI IP select or enter
the OITs IP address.
4) Set Password to the
OITs password
(111111 by default).
5) Check Firmware, if
not already checked.
6) Check Reboot HMI
after download, if not
already checked.
7) Click Download.
8) Once the download is
complete, click Exit.
(035)
Silver Series EM OIT  30  Watlow Addendum