Watlow Addendum to EZwarePlus - Manual (Page 11)

Chapter 4: Programming
Tutorials
The following sections guide you through creating a first project using EZwarePlus and a Silver Series
EM OIT that communicates with a Watlow controller.
Create a First Project
The following procedure guides you through the process of configuring a Silver Series EM OIT to
communicate with a Watlow Controller.
1) To launch
EZwarePlus: on
the Windows task
bar click Start,
click All
Programs, click
Watlow, click
EZwarePlus and
click EZwarePlus.
2) In the Welcome to
EZwarePlus
dialog, for Model,
choose the OIT
model you have.
3) For Display Mode
choose Landscape.
4) Make sure Use
template is
selected.
5) Click OK.
(001)
Note: If you have previously created a project, that project will open. In
that case from the File menu, choose New to create a blank project for
this tutorial and to see the Welcome dialog.
Note: The TS00-0070-EM00 and TS00-0100-EM00 are supported by
the same driver.
4
Silver Series EM OIT  11  Watlow Addendum