1 host bridge configuration, 1 intel igd configuration, Table 1-3 – IEI Integration ECW-281B_D2550 User Manual
Page 85: Model name, Idd-936260a, Sted in, Table 1-4, Input voltage, 90 v ~ 264 v
ECW-281B-D2550 Embedded System
Page 71
5.4.1 Host Bridge Configuration
Use the Host Bridge Configuration menu (BIOS Menu 15) to configure the Intel IGD
Configuration and display the memory information.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Chipset
> Intel IGD Configuration
******* Memory Information *******
Memory Frequency
1067 MHz(DDR3)
Total Memory
2048 MB
DIMM#1 2048
MB
Config Intel IGD
Settings.
---------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General
Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 15: Host Bridge Configuration
5.4.1.1 Intel IGD Configuration
Use the Intel IGD Configuration menu (BIOS Menu 16) to configure the graphics options.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Chipset
Intel IGD Configuration
IGFX – Boot Type
[VBIOS Default]
Fixed Graphics Memory Size
[128MB]
Select the Video Device
which will be activated
during POST. This has no
effect if external
graphics present.
---------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General
Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 16: Intel IGD Configuration