IEI Integration ECW-281B_D2550 - Manual (Page 75)

ECW-281B-D2550 Embedded System
Page 61
IO=2E8h;
IRQ=3, 4
Serial Port I/O port address is 2E8h and the interrupt
address is IRQ3, 4
5.3.6.1.3 Serial Port 3 Configuration
Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.
Disabled Disable the serial port
Enabled D EFAULT
Enable the serial port
Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Auto D EFAULT
The serial port IO port address and interrupt address
are automatically detected.
IO=3E8h;
IRQ=10
Serial Port I/O port address is 3E8h and the interrupt
address is IRQ10
IO=3F8h;
IRQ=10, 11
Serial Port I/O port address is 3F8h and the interrupt
address is IRQ10, 11
IO=2F8h;
IRQ=10, 11
Serial Port I/O port address is 2F8h and the interrupt
address is IRQ10, 11
IO=3E8h;
IRQ=10, 11
Serial Port I/O port address is 3E8h and the interrupt
address is IRQ10, 11
IO=2E8h;
IRQ=10, 11
Serial Port I/O port address is 2E8h and the interrupt
address is IRQ10, 11
IO=250h;
IRQ=10, 11
Serial Port I/O port address is 250h and the interrupt
address is IRQ10, 11
IO=2E0h;
IRQ=10, 11
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ10, 11