IEI Integration ECW-281B_D2550 - Manual (Page 59)

ECW-281B-D2550 Embedded System
Page 45
4.1 System Maintenance Introduction
The following system components may require maintenance.
Motherboard
SO-DIMM module
If these components fail, they must be replaced. Please contact the system reseller or
vendor to purchase replacement parts. Replacement instructions for the above listed
components are described below.
WARNING!
Before accessing any ECW-281B-D2550 internal components, make
sure all power to the system has been disconnected. Failing to do so
may cause severe damage to the ECW-281B-D2550 and injury to the
user.
WARNING!
Please take antistatic precautions when working with the internal
components. The interior of the ECW-281B-D2550 contains very
sensitive electronic components. These components are easily
damaged by electrostatic discharge (ESD). Before working with the
internal components, make sure all anti-static precautions described
earlier have been observed.
4.2 Motherboard Replacement
A user cannot replace a motherboard. If the motherboard fails it must be shipped back to
IEI to be replaced. If the system motherboard has failed, please contact the system vendor,
reseller or an IEI sales person directly.