IEI Integration NOVA-945GSE v1.01 - Manual (Page 34)

NOVA-945GSE 5.25” SBC
Page 34
2.4.3.1 Analog CRT Graphics Mode
The analog CRT bus is interfaced to an on-board 10-pin connector. The connector is
shown in
705H
Figure 2-7. Some of the features of the CRT include:
Integrated 400-MHz RAMDAC
Analog Monitor Support up to QXGA
Support for CRT Hot Plug
2.4.3.2 LVDS Interface
The LVDS interface is connected directly to the LVDS connector on the board (
706H
Figure 2-7).
Some of the features of the LVDS interface include:
Panel support up to UXGA (1600 x 1200)
25-MHz to 112-MHz single-/dual-channel; @18 bpp
o TFT panel type supported
Pixel Dithering for 18-bit TFT panel to emulate 24-bpp true color displays
Panel Fitting. Panning, and Center Mode Supported
CPIS 1.5 compliant
Spread spectrum clocking supported
Panel Power Sequencing support
Integrated PWM interface for LCD backlight inverter control
2.4.3.3 TV Out Interface
The TV Out interface (
707H
Figure 2-7) has the following features.
Three integrated 10-bit DACS
Overscaling
NTSC/PAL
Component, S-Video and Composite Output interfaces
HDTV support
o 480p/720p/1080i/1080p