IEI Integration IMBA-XQ354 v1.00 - Manual (Page 109)

IMBA-XQ354 Motherboard
Page 89
5.6 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
ƒ Keyboard and mouse connectors
ƒ Serial port devices
ƒ VGA screens
ƒ Parallel port devices
ƒ Ethernet connection
ƒ USB devices
ƒ Audio jacks
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding IMBA-XQ354 external peripheral interface connector making
sure the pins are properly aligned.
5.6.1 Keyboard and Mouse
The IMBA-XQ354 has a dual PS/2 connector on the external peripheral interface panel.
The dual PS/2 connector is used to connect to a keyboard and mouse to the system.
Follow the steps below to connect a keyboard and mouse to the IMBA-XQ354.
Step 1: Locate the dual PS/2 connector. The location of the dual PS/2 connector is
shown in Chapter 3.
Step 2: Insert the keyboard/mouse connector. Insert a PS/2 keyboard or mouse
connector into the appropriate PS/2 connector on the external peripheral
interface connector. See
956H956H
Figure 5-18. Step 0: