3 hard disk drives, Menu 22: hard disk drives – IEI Integration IMB-Q354 v1.00 User Manual

Page 171

IMB-Q354 uATX Motherboard

Page 149

6.5.3 Hard Disk Drives

Use the Hard Disk Drives menu to specify the boot sequence of the available HDDs.

When the menu is opened, the HDDs connected to the system are listed as shown below:

1st Drive

[HDD: PM-(part number)]

2nd Drive [HDD: PS-(part number)]

NOTE:

Only the drives connected to the system are shown. For example, if only

two HDDs are connected only “1st Drive” and “2nd Drive” are listed.

The boot sequence from the available devices is selected. If the “1st Drive” option is

selected a list of available HDDs is shown. Select the first HDD the system boots from. If

the “1st Drive” is not used for booting this option may be disabled.

BIOS Menu 22: Hard Disk Drives