6 usb device connection, Figure 5-21: serial device connector – IEI Integration IMB-Q354 v1.00 User Manual

Page 128

IMB-Q354 uATX Motherboard

Page 106

Figure 5-21: Serial Device Connector

Step 3:

Secure the connector. Secure the serial device connector to the external

interface by tightening the two retention screws on either side of the connector.

Step 0:

5.8.6 USB Device Connection

There are two external USB 2.0 connectors. Both connectors are perpendicular to the

IMB-Q354. To connect a USB 2.0 or USB 1.1 device, please follow the instructions below.

Step 1:

Located the USB connectors. The locations of the USB connectors are shown

in Chapter 4.

Step 2:

Align the connectors. Align the USB device connector with one of the

connectors on the IMB-Q354. See Figure 5-22.