IEI Integration IMB-Q354 v1.00 - Manual (Page 123)

IMB-Q354 uATX Motherboard
Page 101
securing the card in place. Step 0:
5.8 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
Audio devices
RJ-45 Ethernet cable connectors
Parallel port device
Keyboard/mouse
Serial port devices
USB devices
VGA monitors
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding IMB-Q354 external peripheral interface connector making
sure the pins are properly aligned.
5.8.1 Audio Connection
Audio signals are interfaced through three phone jack connections. The red phone jack is
for Mic In, blue is for Line In and green is for Speaker Out. Follow the steps below to
connect audio devices to the IMB-Q354.
Step 1: Locate the audio phone jacks. The locations of the audio phone jacks are
shown in Chapter 3.
Step 2: Insert audio phone jack plugs. Insert audio phone jack plugs into the audio
phone jacks on the external peripheral interface. See Figure 5-17. Step 0: