Teledyne LeCroy Voyager Exerciser Generation Script Language Manual - Manual (Page 72)

Teledyne LeCroy Voyager USB 3.0 Exerciser Generation Script Language Reference Manual
63
Format
InitDevice ( clear descriptors, device index )
InitDevice has the following instruction parameters:

clear descriptors: Specifies if all previously added descriptors for this device have to be
removed (1) or kept (zero). Default value is 1.

device index: Specifies the zero-based index of the device to initialize. Default value is 0.
Note: Current version supports only one emulated device.
Examples of calling the InitDevice instruction
# Device emulation
Main
{
# Start the handler task at the beginning of the script.
StartDeviceFrameworkHandler ()
# Initialize device to default state and clear all descriptors.
InitDevice ()
# Add all required descriptors.
…
# At some point, device emulator is connected to the host and
# enumerated .
…
# Re-initialize device, but keep the descriptors.
InitDevice ( 0 )
# Emulate disconnection and reconnection.
SetLinkState ( RX_DETECT )
}
9.2.3 AddDescriptor Instruction
This instruction adds a descriptor structure to the descriptor list for a device. The descriptor alias
is used by the device Framework Handler task when automatically responding to
GET_DESCRIPTOR USB requests.
Format
AddDescriptor ( type, index, request type, recipient, language id,
bRequest, device index )
{
DescriptorData