Teledyne LeCroy Voyager Exerciser Generation Script Language Manual User Manual

Page 27

Teledyne LeCroy

Voyager USB 3.0 Exerciser Generation Script Language Reference Manual

LFPSPingTBurst

Specifies the value of tBurst of Ping.LFPS in nanoseconds.
Note that time value for this setting currently has 8 ns granularity.
Example: Set LFPSPingTBurst = 256
Possible values are:
number of nanoseconds for tBurst of Ping.LFPS
0xFFFFFFFF # AUTO. Use the spec value.
Default value: AUTO (0xFFFFFFFF)
Applicable Mode: DEVICE, HOST

LFPSPingTRepeat

Specifies the value of tRepeat of Ping.LFPS in nanoseconds.
Note that time value for this setting currently has 8 ns granularity.
Example: Set LFPSPingTRepeat = 4000
Possible values are:
number of nanoseconds for tBurst of Ping.LFPS
0xFFFFFFFF # AUTO. Use the spec value.
Default value: AUTO (0xFFFFFFFF)
Applicable Mode: DEVICE, HOST

LFPSWarmResetTBurst Specifies the value of tBurst of WarmReset.

Note that time value for this setting currently has 8 ns granularity.
Example: Set LFPSWarmResetTBurst = 625
Possible values are:
number of nanoseconds for tBurst of WarmReset
0xFFFFFFFF # AUTO. Use the spec value.
Default value: AUTO (0xFFFFFFFF)
Applicable Mode: DEVICE, HOST

LFPSU1ExitTBurst

Specifies the value of tBurst of U1 Exit.
Note that time value for this setting currently has 8 ns granularity.
Example: Set LFPSU1ExitTBurst = 8
Possible values are:
number of nanoseconds for tBurst of U1 Exit
0xFFFFFFFF # AUTO. Use the spec value.
Default value: AUTO (0xFFFFFFFF)
Applicable Mode: DEVICE, HOST

LFPSU2ExitTBurst

Specifies the value of tBurst of U2 Exit.
Note that time value for this setting currently has 8 ns granularity.
Example: Set LFPSU2ExitTBurst = 16
Possible values are:
number of nanoseconds for tBurst of U2 Exit
0xFFFFFFFF # AUTO. Use the spec value.
Default value: AUTO (0xFFFFFFFF)
Applicable Mode: DEVICE, HOST

LFPSU3ExitTBurst

Specifies the value of tBurst of U3 Exit.
Note that time value for this setting currently has 8 ns granularity.
Example: Set LFPSU3ExitTBurst = 24
Possible values are:
number of nanoseconds for tBurst of U3 Exit
0xFFFFFFFF # AUTO. Use the spec value.
Default value: AUTO (0xFFFFFFFF)
Applicable Mode: DEVICE, HOST