Teledyne LeCroy Voyager Exerciser Generation Script Language Manual User Manual
Page 144
Teledyne LeCroy
Voyager USB 3.0 Exerciser Generation Script Language Reference Manual
135
##########################################################################
# Link Delay settings
# This setting adds a specific delay to the response time of LGOODn.
# Please note that requested time will be added to normal (minimum) response
# time of the system.
# Currently, time delay has 100 ns granularity.
Set
DelayLGOOD =
200
# delay in ns to add.
Set
DelayLGOODCnt =
4
# number of times (4) to apply this custom delay.
# This setting adds a specific delay to the response time of LBADn.
Set
DelayLBAD =
300
# delay in ns to add.
Set
DelayLBADCnt =
7
# number of times (7) to apply this custom delay.
# This setting adds a specific delay to the response time of LCRDn.
Set
DelayLCRD =
100
# delay in ns to add.
Set
DelayLCRDCnt =
0xFFFFFFFF
# apply this setting infinite number of times
##########################################################################
# Link Advertisement Error Injection settings
# This setting instructs Exercizer link layer not to send LGOODn LC
# during advertisement phases.
Set
ErrLostLGOODAdv =
4
# number of times to apply this error injection.
# This setting forces the link layer to send an incorrect index number
# in LGOODn LC during advertisement phase.
# For advertisement after reset, it’s expected to be a LGOOD_7.
# After Recovery, it’s expected to be the last Acknowledged header
# sequence number.
# This setting forces the link layer to send some index different
# than expected value.
Set
ErrWrongLGOODAdv =
100
# number of times to apply this error injection.
# This setting instructs Exercizer link layer not to send LCRDn LC
# during advertisement phases.
Set
ErrLostLCRDAdv =
10
# This setting forces the link layer to send LCRDx LCs during advertisement
# phase in wrong order.
# Instead of sending LCRD_A and continuing up to number of free Rx buffers,
# this command forces the link layer to send LCRDx LCs in shuffled order.
Set
ErrWrongLCRDAdv =
3