Teledyne LeCroy Voyager Exerciser Generation Script Language Manual User Manual
Page 147
Teledyne LeCroy
Voyager USB 3.0 Exerciser Generation Script Language Reference Manual
138
###########################################################################
# LFPS Settings
# LFPS Transmitter Timing defined in USB 3.0 Specificaion rev. 1.0
# Polling.LFPS: tBurst Min= 0.6us, Max = 1.4us, Typ = 1us,
# tRepeat Min = 6us, Max = 14us, Typ = 10us
# Ping.LFPS: tBurst Min = 40ns, Max = 200ns
# tRepeat Min = 160ms, Max = 240ms, Typ = 200ms
# Minimum number of LFPS Cycles 2
# tReset: tBurst Min = 800ms, Max = 120ms, Typ = 100ms
# U1 Exit: tBurst Min = 300ns, Max = 900ns/2ms
# (both ports are in U1/one port is in U1 and another is in U2)
# U2/Loopback Exit: tBurst Min = 80us, Max = 2ms
# U3 Wakeup: tBurst Min = 80us, Max = 10ms
###########################################################################
# Specifies user-defined value of T_burst of Polling.LFPS.
# 0xFFFFFFFF - instructs to use the spec value.
Set
LFPSPollingTBurst =
600
# Specifies user-defined value of T_repeat of Polling.LFPS.
# 0xFFFFFFFF - instructs to use the spec value.
Set
LFPSPollingTRepeat =
6000
# Specifies user-defined value of T_burst of Ping.LFPS.
# 0xFFFFFFFF - instructs to use the spec value.
Set
LFPSPingTBurst =
40
# Specifies user-defined value of T_repeat of Ping.LFPS.
# 0xFFFFFFFF - instructs to use the spec value.
Set
LFPSPingTRepeat =
160000000
# Specifies user-defined value of T_burst of WarmReset.
# 0xFFFFFFFF - instructs to use the spec value.
Set
LFPSWarmResetTBurst =
800000000
# Specifies user-defined value of T_burst of U1 Exit.
# 0xFFFFFFFF - instructs to use the spec value.
Set
LFPSU1ExitTBurst =
300
# Specifies user-defined value of T_burst of U2 Exit.
# 0xFFFFFFFF - instructs to use the spec value.
Set
LFPSU2ExitTBurst =
80
# Specifies user-defined value of T_burst of U3 Exit.
# 0xFFFFFFFF - instructs to use the spec value.
Set
LFPSU3ExitTBurst =
80