Teledyne LeCroy Voyager Exerciser Generation Script Language Manual - Manual (Page 160)

Teledyne LeCroy Voyager USB 3.0 Exerciser Generation Script Language Reference Manual
151
Bit Location Register Description Attributes
This bit will be cleared automatically when the INF bit is not
set and the Count value is reached down to zero.
1 INF
0: Run the command for the number of times specified in the
Count field, 1: Run the command for infinite times until the
EN bit is set. RW
3:2 Reserved, filled by 0 RO
4 ONCE
This bit shows that the error has been injected at least once
from the last time EN has been set. It will be cleared
whenever a value 1 is written to EN. RO
7:5 Reserved, filled by 0 RO
15:8 Count
Number of times the error should be injected if the MODE is
1. When read, it shows number of times remained yet to
finish the requested count. RW
16 HP
This bit enables K-symbol injection into Header Packet data.
0: Disabled
1: Enabled RW
17 LC
This bit enables K-symbol injection into Link Command data.
0: Disabled
1: Enabled RW
21:18 LOC
This 4-bit field determines the byte number of the HP or LC
on which the K-symbol should be injected. For LC, just lower
2 bits are valid (locations from 0 to 3). For HP, all bits are
meaningful (locations from 0 to 15). RW
23:22 Reserved, filled by 0 RO
31:24 Symbol
This 8-bit field indicates the 8b encoding of the requested K-
symbol for injection. RW