Teledyne LeCroy Voyager Exerciser Generation Script Language Manual - Manual (Page 23)

Teledyne LeCroy Voyager USB 3.0 Exerciser Generation Script Language Reference Manual
14
DelayLCRD
Allows adding a specific delay to the response time of LCRDn.
Note that the requested time is added to the normal (minimum)
response time of the system.
Also note that time delay currently has 100 ns granularity.
Example: Set DelayLCRD = 100
Possible values are:
delay in nanoseconds # delay to add.
0 # no delay
Default value: 0
Applicable Mode: DEVICE, HOST
DelayLCRDCnt
Specifies number of times to add DelayLCRD.
Example: Set DelayLCRDCnt = 4
Possible values are:
positive integer # number of times to apply.
0 # no adding
0xFFFFFFFF # Apply this setting an infinite number of times.
Default value: 0
Applicable Mode: DEVICE, HOST