Teledyne LeCroy Voyager Exerciser Generation Script Language Manual - Manual (Page 129)

Teledyne LeCroy Voyager USB 3.0 Exerciser Generation Script Language Reference Manual
120
10.19.2 Calling a Generation Procedure with No Parameters
You can "call" a generation procedure and omit some of its parameters, because procedure
parameters have default values.
Example
Block2( SOME_PKT_TEMPLATE $pkt_param, x, y )
{
# Send a packet based on the structure variable parameter 'pkt_param'.
Send pkt_param
{
Field0 = x + y
}
}
Generation
{
# Call the procedure 'Block2' with no parameters.
# In this case, use the default values for procedure parameters.
# Note: '(' ')' is mandatory after the procedure's name.
Call Block2()
}