Teledyne LeCroy Voyager Exerciser Generation Script Language Manual User Manual
Page 30
Teledyne LeCroy
Voyager USB 3.0 Exerciser Generation Script Language Reference Manual
21
ErrCorruptLinkCmd
Specifies that the Exerciser sends Link Commands with
wrong
CRC-5.
Example: Set ErrCorruptLinkCmd = 15
Possible values are Disabled (0), number of times (1 to 255),
or Infinite (0xFFFFFFFF).
Default value: Disabled (0)
Applicable Mode: HOST, DEVICE
Note: This setting is NOT applicable during link
advertisement stages.
ErrCorruptLinkCmdLCRDOnly Specifies that the Link Command corruption setting should
be applied to LCRD Link Commands only.
Example: Set ErrCorruptLinkCmdLCRDOnly = 1
Possible values: 0 or 1
Default value: 0
Applicable Mode: HOST, DEVICE
ErrCorruptLMP
Specifies that the Exerciser sends Link Management Packets
(LMP) Commands with wrong CRC-16.
Example: Set ErrCorruptLMP = 15
Possible values are Disabled (0), number of times (1 to 255),
or Infinite (0xFFFFFFFF).
Default value: Disabled (0)
Applicable Mode: HOST, DEVICE
ErrCorruptLMPCRC5
Specifies that LMP packets sent by the Exerciser should
include a wrong CRC5 value. The number of times to apply
this error is specified by the
Example: Set ErrCorruptLMPCRC5 = 1
Possible values: 0 or 1
Default value: 0
Applicable Mode: HOST, DEVICE
ErrCorruptLMPCRC16
Specifies that LMP packets sent by the Exerciser should
include a wrong CRC16 value. The number of times to apply
this error is specified by the
Example: Set ErrCorruptLMPCRC16 = 1
Possible values: 0 or 1
Default value: 0
Applicable Mode: HOST, DEVICE
ErrCorruptLMPHSN
Specifies that LMP packets sent by the Exerciser should
include a wrong Header Sequence Number value. The
number of times to apply this error is specified by the
Example: Set ErrCorruptLMPHSN = 1
Possible values: 0 or 1
Default value: 0
Applicable Mode: HOST, DEVICE
ErrCorruptLMPNoCap
Specifies that the Exerciser should not send the
LMP Capability packet during link initialization.
Example: Set ErrCorruptLMPNoCap = 1
Possible values: 0 or 1
Default value: 0
Applicable Mode: HOST, DEVICE