Saving and recalling setups, Saving the screen image to a clipboard, Overview – Teledyne LeCroy WaveSurfer MXs-B Getting Started Manual User Manual
Page 89: Saving oscilloscope settings as a setup file

Getting Started Manual
922172-00 Rev A
81
Saving the Screen Image to a Clipboard
Choose Clipboard if you want to save the screen image to the
clipboard so you can paste a file into another application (like MS
Word, for example).
1. Touch Utilities Utilities Setup... from the menu bar.
2. Touch the Hardcopy tab.
3. Under Colors, touch the Use Print Colors checkbox if you want the
traces printed on a white background. A white background saves
printer toner.
4. Touch the Grid Area Only checkbox if you do not need to print the
dialog area and you only want to show the waveforms and grids.
5. Touch the Print Now button, or use the front panel Print button to
save the file.
Saving and Recalling Setups
Overview
You can save or recall settings to or from hard disk, USB key, or LAN
locations. This can be very helpful if you repeat the same types of tasks
over and over again, or if you share the scope with many people.
Saving Oscilloscope Settings as a Setup File
Choose File Save Setup from menu bar.
Choose to save the Waveform Data as an Internal
Setup temporary location in RAM or to a File on
the hard drive or external storage device.
Touch Save Now to save the file.