IAI America IX-UNN3515 - Manual (Page 46)

40
6. Inspection/Maintenance
Warning
6.3 Battery Replacement
6.3.1 Preparation
The following items are required when replacing the batteries:
x Hex wrench (2.5 mm)
x New dedicated batteries for IX AB-3 (4 pieces)
Before replacing the batteries, turn off the power to the controller, control panel and other relevant units.
z Performing inspection or maintenance without fully understanding the details of work may result in
a serious accident.
z Display a “Work in Progress” sign so that other operators will not operate the controller, operation
panel, etc.
z Use dedicated batteries for IX. Batteries for the old model (IH) cannot be used.
Caution