IAI America LSA-W21SS User Manual
Page 53
39
[3] Pull the stainless sheet from the side not yet secured and align it with the marker lines in the same
manner. Loosely tighten the bolts on the top stainless-sheet retainer plate just enough to keep the
stainless sheet from moving.
Once the stainless sheet is installed as marked, the height of the warped part of the sheet in the
slider drops 1.0 mm from the installation surface of the slider cover to prevent contact with the
slider cover.
Marker line
Top stainless-sheet retainer plate
Clearance:
1.0 mm