IAI America LSA-W21SS - Manual (Page 51)

37
(4)
Install the side cover to its original condition.
[1] Install the side cover you have removed earlier.
[2] Use an Allen wrench of 4 mm across flats to tighten the bolts and secure the side cover.
[3] Use an Allen wrench of 2.5 mm across flats to tighten the bolts at both ends of the bottom
stainless-sheet retainer plate to secure the retainer plate.
Side cover
Before installing the side cover After installing the side cover
Tightening torque: 411 N cm
(41.9 kgf cm)
Bottom stainless-sheet retainer plate