IAI America LSA-W21SS - Manual (Page 49)

35
(2) Remove the side cover from the side where there is no cable track.
[1] Use an Allen wrench of 2.5 mm across flats to remove the bolts securing the bottom stainless-
sheet retainer plate. Remove the bolts at both ends of the bottom stainless-sheet retainer plate.
[2] Use an Allen wrench of 4 mm across flats to loosen all bolts securing the side cover. Even though
loose, the bolts are sill in the holes and cannot be taken out by hand. Use tweezers to take out the
bolts.
Side cover
Bottom stainless-sheet retainer plate
Side cover
Side cover
Use tweezers to
take out the bolts.
Side cover