IAI America LSA-W21SS - Manual (Page 30)

16
9.3 Stainless Sheet
The stainless sheet is held in position by the attraction forces of rubber magnets provided on the side
covers. If ambient air contains a lot of magnetic substances such as iron powder, these magnetic
substances may be attracted to the rubber magnets and enter the space between the stainless sheet and
magnets, thereby causing problems. Therefore, avoid using the actuator in an environment where the
actuator will come in contact with a high level of magnetic substances.
 If viscous substances such as adhesives and paints attach to the stainless sheet, slider malfunction or
sheet damage may occur. Prevent viscous substances from contacting the actuator.
 Take note that applying a force only to a specific part of the stainless sheet may cause the affected part
to deform and create various problems. Also, do not grip or hold the stainless sheet when installing or
transporting the actuator, as it may damage the sheet.
 Be careful not to let a tool or work part drop onto the actuator to dent the exterior of the actuator.
Do not press the sheet directly with hands.
9.4 Slider Cover
Do not apply force on the slider cover. It may cause interference and other damages.
Slider cover