IAI America RCP2-RTCBL - Manual (Page 74)

66
6SHFL¿FDWLRQV
11.4 Options
11.4.1 Shaft Adapters
These shaft-shaped adapters are used to install a jig, etc., to the rotating part.
Drawing based on combination of
RCP2-RTBS/RTBSL
Drawing based on combination of
RCP2-RTB/RTBL
Drawing based on combination of
RCP2-RTBB/RTBBL
Drawing based on combination of
RCP2-RTCS/RTCSL
Drawing based on combination of
RCP2-RTC/RTCL
Drawing based on combination of
RCP2-RTCB/RTCBL
Unit model: RCP2-SA-RTS
(Unit weight: 0.02 kg) Unit model: RCP2-SA-RT
(Unit weight: 0.04 kg) Unit model: RCP2-SA-RTB
(Unit weight: 0.2 kg)
Unit model: RCP2-SA-RTS
(Unit weight: 0.02 kg) Unit model: RCP2-SA-RT
(Unit weight: 0.04 kg) Unit model: RCP2-SA-RTB
(Unit weight: 0.2 kg)
4-M3, depth 7 4-M4, depth 7
4-M5, depth 8.6
RTBS/RTBSL/RTCS/RTCSL shaft RTB/RTBL/RTC/RTCL shaft
‡6, counterbore depth 3.3
(5 holes are equally distributed)
‡6, counterbore depth 3.3
‡7.5, counterbore depth 4.5
R0.2 or less
R0.2 or less
through
depth 4
depth 3
D epth5
RTBB/RTBBL/RTCB/RTCBL shaft