Caution – IAI America RCP2-RTCBL User Manual
Page 59
51
10. Maintenance/Inspection
[3]
While turning the gear, add grease from the opening in the rear until the bottom of the teeth is
covered with grease.
(Turn the input shaft to turn the output gear.)
Once a sufficient amount of grease has been added, move the gear back and forth several times to
evenly spread grease.
Small type
Caution
• The multi-rotation specification RTBL/RTCL ha
• In case the grease got into your eye, immediately go to see the doctor to get an appropriate care.
• After finishing the grease supply work, wash your hands carefully with water and soap to rinse
the grease off.
s the home sensor installed on the rear opening
side. Accordingly, apply grease on the gears by exercising caution not to let grease attach to the
home sensor.
Add grease to the gear.
Add grease to the gear.
RTBS, RTBSL (Vertical type)
RTCS, RTCSL (Flat type)
RTBS, RTBSL (Vertical type)
(rear opening)
RTCS, RTCSL (Flat type)
(rear opening)
Turn. Turn.