IAI America RCA-P - Manual (Page 32)

(3) All Clear:
The data of all the position numbers is cleared.
The position data table becomes as shown below.
No. Position Speed ACC • DEC Push % Range ACC MAX ABS/INC
0 0.00 125 mm/s 0.20 G 0% 0.10mm 0 0
1 50.00 100 mm/s 0.10 G 0% 0.20mm 1 0
2 80.00 100 mm/s 0.10 G 40% 5.00mm 0 0
3 10.00 20 mm/s 0.20 G 0% 0.10mm 0 1
No. Position Speed ACC • DEC Push % Range ACC MAX ABS/INC
0 * * mm/s * G * % * mm * 0
1 * * mm/s * G * % * mm * 0
2 * * mm/s * G * % * mm * 0
3 * * mm/s * G * % * mm * 0
Mode Select A. 00
* Edit/Teach
In the Mode Select Screen, using the Keys,
select Edit/Teach and then, press the Return Key.
Edit/Teach A. 00
* All Clear
In the Edit/Teach Screen, using the Keys,
select All Clear and then, press the Return Key.
Pressing 1 on the Numeric Key will clear all data and
screen will return to the Edit/Teach Screen.
To cancel, press 0.
then, the
All Clear? A. 00
Y
Æ 1 N Æ 0
In either case, the screen will return to the previous
screen.
Edit/Teach A. 00
* All Clear
Mode Select A. 00
* Edit/Teach
Press the ESC Key once to return the screen back to
Mode Select Screen.
28