Important safety information – Teledyne GFC-7001T - Trace CO Analyzer User Manual
Page 7
Safety Information Teledyne API – Model T300/T300M CO Analyzer
Teledyne
Analytical
Instruments
IMPORTANT SAFETY INFORMATION
Important safety messages are provided throughout this manual. Please read these messages carefully.
A safety message alerts you to potential hazards that could hurt you or others. Each safety message is
associated with a safety alert symbol. These symbols are found in the manual and inside the instrument. The
definition of these symbols is described below:
WARNING: Electrical Shock Hazard
HAZARD: Strong oxidizer
GENERAL WARNING/CAUTION: Read the accompanying
message for specific information.
CAUTION: Hot Surface Warning
Technician Symbol: All operations marked with this symbol are to
be performed by qualified maintenance personnel only.
DO NOT TOUCH: Touching some parts of the instrument without
protection or proper tools could result in damage to the part(s)
and/or the instrument.
Electrical Ground: This symbol inside the instrument marks the
central safety grounding point for the instrument.
CAUTION - General Safety Hazard
This instrument should only be used for the purpose and in the manner
described in this manual. If you use this instrument in a manner other
than that for which it was intended, unpredictable behavior could ensue
with possible hazardous consequences.
NEVER use any gas analyzer to sample combustible gas(es).
Note
Technical Assistance regarding the use and maintenance of the
GFC7001T or any other Teledyne product can be obtained by contacting
Teledyne Customer Service Department:
Phone: 888-789-8168
Email:
or by accessing various service options on our website at
http://www.teledyne-ai.com/
.