beautypg.com

Signal i/o – Teledyne GFC-7001T - Trace CO Analyzer User Manual

Page 115

background image

SetupTeledyne API – Model T300/T300M CO Analyzer

Teledyne

Analytical

Instruments

115

5.9.1. SIGNAL I/O

The signal I/O diagnostic mode allows a user to review and change the digital and
analog input/output functions of the analyzer. Refer to Appendix A-4 for a full list of
the parameters available for review under this menu.

I

MPORTANT

I

MPACT ON

R

EADINGS OR

D

ATA

Any changes of signal I/O settings will remain in effect only until the
signal I/O menu is exited. Exceptions are the ozone generator override
and the flow sensor calibration, which remain as entered when exiting.

Access the SIGNAL I/O test mode from the DIAG Menu: