Teledyne GFC-7001T - Trace CO Analyzer - Manual (Page 146)

CommunicationsTeledyne API – Model T300/T300M CO Analyzer
Teledyne Analytical Instruments 146
6.5.2. CONFIGURING ETHERNET COMMUNICATION USING DYNAMIC
HOST CONFIGURATION PROTOCOL (DHCP)
The default Ethernet setting is DHCP.
1. See your network administrator to affirm that your network server is running DHCP.
2. Access the Communications Menu (SETUP>MORE>COMM) and follow the setup
sequence as shown in Figure 6-5.
Figure 6-5 : COMM – LAN / Internet Automatic Configuration (DHCP)