Related documentation, Version identification – Micromod MOD: 1800P - MOD 30ML Identity Module (Version 2) PID and Ramp/Soak Functions User Manual
Page 6

Continuous Control Functions
INTRODUCTION
1-2
1.4 RELATED DOCUMENTATION
Additional information about logic and display functions can be found in:
•
IB-23G600 – Database Reference for Logic Functions - Book 1
•
IB-23G602 – Database Reference for Logic Functions - Book 2
•
IB-1800R-APP – Database Reference for MOD 30ML Functions
Information about configuration of the functions in this book can be found in:
•
ViZapp.hlp – Help file for Visual Application Designer (Windows 95, NT)
•
IB-23H141 – User’s Guide, MODCELL Application Builder (DOS)
•
IB-23H120 – User’s Guide, PC-30 Interface Software (DOS) for MOD 30 and MODCELL
•
IB-23H153 – User’s Guide, Device I/O Driver using Extended Modbus Protocol (EMP) for
FIX DMACS and FIX MMI
•
IB-23H154 – User’s Guide, Device I/O Driver using Extended Modbus Protocol
(XMODBUS) for PC-30
ICN connection and loading information can be found in the following:
•
IB-23A160 – Instrument Communications Network (ICN) Planning
Users developing interface software to this instrument will also need the following:
•
IB-23G001 – ICN Communication Link Programmer’s Manual
1.5 VERSION IDENTIFICATION
To verify the version level of the instrument, check the catalog number marked on the PROM
label of the identity module or issue the status command R VERSION from the configuration
software status page. The firmware version is a digit in the catalog number as follows:
Catalog Number Description for 2004P
BASE NUMBER
2004P
MODCELL Advanced Control Identity Module
UNUSED
Z
Unused Character
ELECTRICAL CODE
10
General Purpose
FUNCTION
1
Advanced Control
FIRMWARE VERSION 01
Version 1 (same as 2001P version 4 plus
sequencer)
02
Version 2 (same as 2001P version 5 plus
PID)
03
Version 3 (same as 2001P version 6 plus
PID, RSK)
MODEL
A
Design Level (256K PROMs)
B
Design Level (512K PROMs)
C
Design Level (512K Flash RAM)
Sample Number
2004PZ10103C (Product is serialized)
Version number identification for specific blocks is obtained through the database.
The catalog number description for the 1800P MOD 30ML Control Identity Module
is found in IB-1800R-APP.